Outdoor Extension Cord

The Best Way To Keep Rain From Getting Into An Outdoor Extension Cord

Most of the time, we start power-intensive tasks outside.

Therefore, an exterior extension cord must be used.

In addition, a lot of individuals choose to make their own private outdoor spaces for leisure. Sound systems, ambient lighting, and extension cables are a few of these spaces’ key components.

Particularly when it comes to outdoor activities and undertakings, these cables help us to accomplish our aims. However, there are risks associated with using outside extension cables.

So when utilizing this device, use caution so as not to hurt yourself or your teammates.

One of the elements that might make using extension cables outside riskier is the unpredictability of the weather.

Any contact with rainfall might result in electric shock or electrocution since water is a powerful conductor of electricity. The cable could potentially be harmed.

When utilizing an extension cable outdoors, it is essential to protect it from rain to avoid these dangers.

You require tools and a straightforward method to shield an extension cable from rainfall once you are conscious that rain poses a serious hazard to its safety.

The cord can be protected by being wrapped in a plastic bag or placing a plastic cord case over it.

Even better, to keep the cord dry for a time, wrap it with duct tape or electrical tape.

The finest strategies for shielding your outside expansion from the elements are covered in this article.

You may use your electrical wires outside safely and fearlessly by following these safety recommendations.

Easy Techniques for Protecting Your extension cord from Rain

You can shield your outside extension from rain using these low-tech DIY techniques, protecting it from any electrical risks brought on by water contact.

In addition, these advice will provide you piece of mind despite changing weather circumstances.

Here are some tried-and-true strategies for protecting your outside extension cable from the rain:

  • Employ a power cord shield

Using a power shield is an easy method to safeguard your extension cable. It is a straightforward procedure that calls for a drill, a knife, and a container.

The visible portions of the cord must be able to be covered by this container. In other words, a lengthy and thick extension cord requires a huge container.

After deciding on a container that correctly accommodates the cord:

  1. Use a drill to make holes on the container’s opposing sides.
  2. Draw the cord as needed after threading the cord through the slots on both sides.
  3. If necessary, expand the holes with the knife and adjust the container and the cable accordingly.

The device is shielded from rain and humid weather by the power cord. Avoid using metal tape to hold the cord in place; instead, use electrical tape or duct tape.

  • Apply Cling Wrap.

If you’re utilizing an outside extension cord and seeking a reliable approach to shield your connection from changing weather, think about using Cling Wrap.

Wrap the extension cord’s attached components with plastic.

This will screen the connection from moisture and guard against electric shock.

One benefit of using Cling Wrap is that you may combine it with other techniques to provide stronger defence against bad weather.

  • Utilize a Power Cord Protector.

By utilizing a power cord protector, you may secure your outside extension cable in another straightforward manner. A rubber is required to utilize this technique.

Consider a bicycle inner tube as an example. Once you have this, cut it open starting at one end. The cable should then be fed through the tube.

You might also need electrical tape to secure the extension cord.

  • Apply the bucket approach

You will need a shovel and two buckets to use this technique. The bucket should first be placed on the ground with the entrance facing the ground.

The cord’s connected end should then be placed on the bucket.

The next step is to hide the connection by sliding the second bucket into the one below. To put it another way, slip the second bucket into the aperture of the first one to secure the connection.

If the wind is a factor, dig a shallow hole in the ground and place the bucket inside.

Make sure it firmly fits in the opening. The buckets can also be weighted down to shield them from the effects of the wind.

  • Apply the bottle approach

This technique may be used to cover Christmas lights in addition to safeguarding extension cable connectors.

For this technique, you’ll need a soda bottle, a box cutter or knife, some scissors, and a tool with a sharp edge to cut through the bottle.

Use this tool to make a 14″ cut all the way around the 2-litre soda bottle, about halfway through the bottle.

Then, using scissors, cut a spherical hole at the slit’s end. Allowing the cord to protrude from the openings, slide the plugs into place within the bottle.

  • Cover extension cords using

You can easily protect your extension cord from the elements with this technique.

Use the bags to enclose your extension wires and connectors, then use electrical tape to keep them in place.

The bag may also be divided into smaller pieces and used to hide the connections in various places. Electrical tapes are used to affix the smaller plastic bags.


If users are irresponsible and don’t take the necessary precautions, outside extension cables might pose an electrical risk.

For instance, securing the electrical cord to a surface with nails or other fasteners might cause an electrical shock.

Additionally, when operating in poor conditions, extending the wire to its full length might damage the cord or endanger the users.

By using the aforementioned DIY techniques, you can shield your technology from bad weather and avoid electrical dangers like electric shocks and electrocution.

Scroll to Top